Відео

Such a cool comparison video! I’ve been uncertain about Oathsworn after watching some playthroughs, but those minis look stunning! 🤩 KD:M is one of my favorites, but I’ve been finding the grind lately a little much. Excited to see how Gambler’s Chest changes that.

Blood Bowl is the best! May Nuffle's blessing be upon you 😉

Really excited to see what OPR comes up with for HDF when they release the files in a few months

In 40K, I have a melee infantry unit that’s supposed to be good against vehicles. With a bunch of buffs to the number of attacks, I was able to do 76 attacks. That’s 76 dice rolling against a tank. By the time all the dice rolls were done, I chipped off 2 wounds. I scooped after that.

FYI, Kvissle is no longer being produced and has been replaced by Harvmatta, which looks like it slots nicely into the Kallax shelf system

Since I already have the minis, I purchased a "no minis" version of Darktide for $38 shipped.

Yo I immediately spotted the Guard babes. I just finished 1000pts of Guard using the Jungle and Gasmask Babes. Love AcrossTheRealms

I don't know if you noticed that you used paint/primer. Did that effect the paint when you painted them? Reason I ask is because that's the same can of primer I bought, and I thought I messed up.

I've been running pure Sunlu ABS for a while, and I really enjoy it! I love the black version the most, since it doesn't need any mixing regardless of how long it sits out, as opposed to the greys. I do have a bottle of Tenacious though, I should give the 10% a try.

I've been printing terrain for about seven years now. Started on a Flashforge Dreamer, then seven Ender 3s, then Prusas. I got rid of them all for Bambu Labs printers. They are phenomenal. I've got one P1P and five P1Ses. One AMS, but I've never even done a single multi color print. Like you, I vastly prefer painting terrain, I'm also a professional terrain builder AND I'm about to open my own game store based on my terrain!

How many and what kind of distribution would you recommend... as in how many corners, "parks", straight lanes, intersecions shouls I make for a decent project? (SOrry if you mentioned it and missed it on the vid...)

How about Nylon-Lyke?

I'm with you about painting. I really prefer painting my models over using the AMS for terrian pieces. I do like the AMS for other types of things. On the color bleed, you can change the purge length in the slicer. Orange to blue would probably need a long transition. You can also purge into the infill.

Really nice job! I enjoyed it ! Well done!

I've been trying using PETG as a support interface on PLA prints. I've had support breakage during the print and thought that maybe the PETG was bleeding into the PLA supports. Your observations support my thoughts. So far, using Bambu Support Filament on PLA prints with a .24 Top Z distance, .4 nozzle, .08 layer size on a Bambu A1 Mini with AMS lite seems to be the way to go. Fingers crossed :)

Joseph Prusa got caught with his pants down when core x-y hit the market. Bambu, Voron, etc. he even admitted it in a podcast a couple years ago. He really hasn’t handled it well. His machines are waaaaaaay overpriced. Especially the “upgrade” kits. How he sells any of those is amazing and shows the level of stupidity amongst the fanboys whom have more $$$ than sense.

bambu is commie crap. a1 is a pile of sht

Have you changed any of the purge settings? I have A1 + AMS and have never had colors bleeding together. When I bought mine you could only buy them as a bundle, but if I had the choice now I would use the money for the AMS to buy filament because I rarely do multicolor prints

You sir, are a YT legend to me! I purchased both of these after conversing with you about just this via comments! Thank you so much!

I have a Bambu P1S and I use Bambu filaments and I don't have the color issues that you are having. BTW, there is a new setting (experimental) that can reduce some of the waste by retracting the filament before cutting. You have to enable "Develop Mode" in the Preferences dialog box. Then go to the printer settings and at the bottom of the Extruder tab you will find "Long retraction when cut". Also use the "Flush into objects' infill" and "Flush into objects' support" option in the "Others" tab. This will put more of the filament transitions into a place where you won't see them.

Hello, great work !!! but I have question, how do you do for having a terrain 36" x 36" with tiles 8" x 8" ?

It’s “No Pun Included” not “No Pun Intended.”

Prusa is extremely overpriced and sooner or later everyone will realize that and switch except for the hard headed individuals

You can use a model as a purge tower. So you get an extra object and no poop.

i'd love to see you do color printing WITH added shade and highlight to see what that looks like. it might save you time of the base coat? Could be a cool experiment. I see your friend at Xykit is running some new campaigns on rpg "stuff" like dice boxes that could use the multicolor printing. Wouldn't mind a review of those too!

The Color bleed also depends on the colors you are using, ie going from dark colors to light colors. Did you use Bambu Studio to slice it? If so, you can change the amount of filament that's purged as well as the size of your "purge block" to help with the color changes. So tweaks in the slicer can help reduce the bleed. I definitely agree about painting models, except for things like the counters. Those are nice just being filament colors. So it's definitely model depend and what you are using the model for.

Thank you for the video, great reference for painting

For the cork, just pour boiling water on the back side and then pull - super easy takes literally a minute

Gates of Valhalla is a very fun SoB core set, Rage ability is a game changer. But Valley of The Serpent Kings is also great! :)

Actually the sunlu high tough 3kg is cheaper about €20 per kg I also like the Siraya fast but to expensive

How do you get the walls and doors for the slim version of your floor tiles? What folder are they in?

Gaming Geek I have to ask you (I’ve conversed with you before on this…). Do you still think the Bambu Lab A1 > Prusa Mk 4? A1 is on sale and I need an upgrade from my Ender 3 nightmares after 3+ years of fighting them. I respect your opinion. Thanks for great content every week! One of my favorites!

I had thought the rulebook for the expansion was going to be soft-cover, hardcover is a nice surprise

Do you have a cut list? Trying to measure it out from the diagram is killing me. Is it a 32” tv?

Just bought all the supplies today 6/23/24 less the electrical and cupholders and bottle openers and it was $475 with a 10% discount at Home Depot. Used his shopping list to gather supplies. You can build it out of poplar for less, but it will live where you put it forever.

Can't wait to get it :)

Really enjoyed your guide and tips and have been one of my beacon to get all my HQ furniture painted. I paid you homage in my very noob-ly made video :)

The problem with the player tracker boards is the the circles are slightly too small to fit the disk tokens. As someone else mentioned, they're not something that any Gamefound backer will be receiving... they're something that will be available from the Von Braus webstore in the future.

FYI, the character tracker boards were not part of the False Prophet campaign. They're Michael's next project that's supposed to be available via his website shortly after False Prophet is delivered. I'm guessing that they're probably far along enough that he wanted people to get a chance to see them, so they're being included in the review copies.

I started printing 3d models and plan on getting dungeon blocks to make everything 3d. I've run into trouble looking for floor effects that I can just place, like water, lava, ooze, blood etc. I think it would be easier than printing the blocks. I just got a qidi m1 pro and can't wait to try it. I'm hopping it will be able to handle the terrain with ease.

Really excited to get my copy! I have a group eager and ready to learn this game and the best part is no DM, so I also get to play!!

I watched this offer but in the end didn't back it because...............I didn't like the font style used. Eh, maybe I buy too much. Thanks for the video, I'm still thinking this one over.

I ordered mine and am excited to see it arrive. Your review helped cement this as my WHQuest replacement. Thanks so much.

Hello, I saw your tshirt and im wondering if you are living in japan, and my question is, whenver there is an earthquake, how you mantain all those glass stands safe?

That paintjob for Apocalypse Dawn is amazing.

I loved AD&D 2E, and we tried to play TSR's Star Frontiers, which sucked majorly. Traveller was a much better game.

Just a heads up, the Kvissle is being discontinued on July 1st 2024. Last chance if your IKEA has any

On a previous video. I want to thank you for turning me on to Hobby Lobby DecoArt Americana paints. They work AWESOME. Highly pigmented, and you can't beat them at 99 cents for 2oz. I'm painting my HEROQUEST board now, and I'm amazed at the quality for 99 cents per color!

Even the Bambu A1 is better than an Mk4 :D

Not sure if you read old comments. But on the off chance that you do I still have to ask, did you do any major play on this terrain? Because it looks awesome and it would be super interesting to hear if it was also enjoyable to play on :)